H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 8)

1
Configuring basic settings for an access
controller module
Access controller module and Ethernet switch
compatibility matrix
NOTE:
•
Support for this feature may vary depending on your device model. For more information, see About the
WX Series Access Controllers Configuration Guides.
• The access controller modules in this manual refer to the access controller modules inserted on the
expansion slots on the switch. For the compatibility matrix of the access controller modules and the
Ethernet switches, see Table 1 .
• Do not execute the shutdown command on the Ethernet interface that connects the switch and the access
controller module.
• For switches (for example, the S5800 Switch Series) supporting the Intelligent Resiliency Framework
(IRF), if one of the IRF members has an access controller module installed, the access controller module
can manage all fit APs connected to all the IRF members.
Table 1 Access controller module and Ethernet switch compatibility matrix
Access controller
module
Ethernet switch model
LSWM1WCM20
S5800-60C-PWR/S5800-32F/S5800-56C/S5800-32C/S5800-32C-PWR/S5800-56
C-PWR
LSWM1WCM10 S5800-60C-PWR/S5820X-28C
LSQM1WCMB0 S7502E/S7503E-S/S7503E/S7506E-S/S7506E/S7506E-V/S7510E
LSQM1WCMD0 S7502E/S7503E/S7503E-S/S7506E-V/ S7506E/S7506E-S/S7510E
LSBM1WCM2A0 S9512/S9508/S9508V/S9505
LSRM1WCM2A1 S9505E/S9508E-V/S9512E
LSRM1WCM3A1 S9505E/S9508E-V/S9512E