1 introduction, Related manuals, Volume introduction – H3C Technologies H3C SR6600 User Manual
Page 2: 1 volume introduction, Introduction
1-1
1
Introduction
z
This manual is applicable to H3C SR6602, SR6604, SR6608 and SR6616 routers, where SR6602
is a centralized device, SR6604, SR6608 and SR6616 are distributed devices. For the commands
that are different for centralized and distributed devices, this manual introduces them respectively.
z
The configurations in this manual take SR6602 as an example.
Related Manuals
z
For the installation, startup and configuration, software maintenance, hardware maintenance,
functions of interface card and interface module, cable connection and troubleshooting of the
router, refer to H3C SR6602 Router Installation Manual, H3C SR6604/6608 Router Installation
Manual
and H3C SR6616 Router Installation Manual.
z
For all cable pinouts available with SR6600 routers, refer to LMR Series Routers Cable Manual.
You can log in to http://www.h3c.com to get product documentation of the newest version in the
following way:
On the homepage of H3C at http://www.h3c.com, select Technical Support & Document > Technical
Documents
from the navigation menu at the top. Then select a product for its documents.
Volume Introduction
Software features on the H3C SR6600 routers are introduced in ten volumes as the following:
z
: Configuration of interfaces and link layer protocols supported on the router.
z
: Configuration of IP-related features such as IP address, ARP, DNS, DHCP, IP
performance, IP unicast routing, ACL, and IPv6.
z
: Configuration of routing protocols such as static route, RIP, RIPng, OSPF,
OSPFv3, IS-IS, BGP, BGP4+ and routing policy.
z
: Configuration of MPLS and VPN related protocols such as MPLS, MPLS TE,
GRE, MPLS L3VPN, and MPLS L2VPN.
z
: Configuration of QoS related protocols and features supported on the router, such as
traffic classification, policing, and shaping, QoS policy, congestion management, congestion
avoidance, MPLS QoS and Frame Relay QoS.
z
: Configuration of security protocols such as AAA, user management, firewall,
NAT, IPsec, IKE, RADIUS, and HWTACACS.
z
: Configuration of system-related protocols and features such as basic system
configuration, user login, file system management, system maintenance, NTP, SNMP, RMON, and
VRRP.