H3C Technologies H3C SR6600 - Manual (Page 16)

2-13
Feature
Operation and command
manual
Feature description
Information
Center
Information Center
Configuration
Information Center
Commands
Acting as the system information hub, information
center classifies and manages system information.
z
Configuring the information center
User Interface
User Interface
Configuration
User Interface Commands
User interface view is a feature that allows you to
manage asynchronous serial interfaces that work in
flow mode. By operating under user interface view,
you can centralize the management of various
configurations.
z
Configuring asynchronous interface attributes
z
Configuring terminal attributes
z
Configuring modem attributes
z
Configuring the auto-execute command
z
Configuring user privilege level
z
Configuring access restriction to VTY user
interfaces
z
Configuring supported protocols on VTY user
interfaces
z
Configuring redirection function on the
asynchronous serial interface
z
Configuring authentication mode at login
Track
Track Configuration
Track Commands
The Track module is used to implement collaboration
between different modules. The collaboration here
involves three parts: the application modules, the
Track module, and the detection modules. Perform
the following tasks to configure track:
z
Track overview
z
Configuration of collaboration between the track
module and NQA
z
Configuration of collaboration between the track
module and the application modules
IPv6
NetStream
IPv6 NetStream
Configuration
IPv6 NetStream
Commands
IPv6 NetStream provides the packet statistics
function. It differentiates IPv6 flows based on
destination address, source IP address, destination
port number, source port number, protocol number,
stream tag, and/or inbound/outbound interface, it
collects statistics on a per-flow basis.
z
IPv6 NetStream statistics configuration
z
IPv6 NetStream aggregation configuration
z
Configuration of attributes of IPv6 NetStream
data
z
IPv6 NetStream flow aging configuration
Sampler
Sampler Configuration
Sampler Commands
A sampler provides the packet sampling function,
that is, a sampler selects a packet from a group of
packets with fixed number, and sends it to the
service module for processing.