H3C Technologies H3C S5120 Series Switches - Manual (Page 19)

13
Task Command Remarks
Display the detailed information for
an OpenFlow instance.
display openflow instance [ instance-id ] Available in any view
Display flow table entries for an
OpenFlow instance. display openflow instance instance-id
flow-table [ table-id ]
Available in any view
Display controller information for
an OpenFlow instance. display openflow instance instance-id
controller
Available in any view
Display group table information for
an OpenFlow instance. display openflow instance instance-id group
[ group-id ]
Available in any view
Display meter information for an
OpenFlow instance. display openflow instance instance-id meter
[ meter-id ]
Available in any view
Display summary OpenFlow
instance information.
display openflow summary Available in any view
OpenFlow configuration example
Network requirements
As shown in Figure 7 , perform the following configuration on the switch to enable OpenFlow
communication with the controller in specific VLANs:
• Create OpenFlow instance 1, associate VLANs 4092 and 4094 with the OpenFlow instance, and
activate the OpenFlow instance.
• Configure the controller's IP address to have the controller manage the OpenFlow switch.
Figure 7 Network diagram
Configuration procedure
# Create VLANs 4092 and 4094.
system-view
[Switch] vlan 4092
[Switch-vlan4092] quit
[Switch] vlan 4094
[Switch-vlan4092] quit
# Create OpenFlow instance 1 and associate VLANs with it.