H3C Technologies H3C S5560 Series Switches - Manual (Page 3)

3
Table 4 QSFP+ to SFP+ DAC cables available for the QSFP+ ports
QSFP+ to SFP+
DAC cable
Cable length Data rate
LSWM1QSTK3 1 m (3.28 ft)
40 Gbps LSWM1QSTK4 3 m (9.84 ft)
LSWM1QSTK5 5 m (16.40 ft)
NOTE:
H3C recommends that you use H3C QSFP+ transceiver modules,
QSFP+ DAC cables, or QSFP+ to SFP+ DAC cables for the QSFP+
ports on the LSWM2QP2P interface card. The QSFP+ transceiver
modules, QSFP+ DAC cables, and QSFP+ to SFP+ DAC cables
available for the interface card are subject to change over time. For
the most recent list of QSFP+ transceiver modules, QSFP+ DAC
cables, and QSFP+ to SFP+ DAC cables available for the interface
card, contact H3C Support or marketing staff.
For more information about H3C QSFP+ transceiver modules, QSFP+
DAC cables, and QSFP+ to SFP+ DAC cables, see H3C Transceiver
Modules User Guide at www.h3c.com.
LEDs
Table 5 describes LEDs for the QSFP+ ports.
Table 5 QSFP+ LED descriptions
LED status Description
Steady green
A transceiver module is installed in the port. The
port is operating at 40 Gbps, and a link is present
on the port.
Flashing green The port is sending or receiving data at 40 Gbps.
Steady yellow
A transceiver module is installed in the port. The
port is operating at 10 Gbps, and a link is present
on the port.
Flashing yellow The port is sending or receiving data at 10 Gbps.