H3C Technologies H3C S6800 Series Switches - Manual (Page 16)

12
To remove an interface card:
1. Prepare an anti-static bag.
2. Press the latch to release the ejector lever
3. Rotate outward the ejector lever as shown by callout 1 in Figure 4 .
4. Pull out the interface card slowly out of the interface card slot, as
shown by callout 2 in
Figure 4 .
5. Place the removed interface card in the anti-static bag.
Figure 4 Removing an LSWM124XG2QFC interface card
Installing and removing SFP, SFP+, and QSFP+
transceiver modules and SFP+ and QSFP+
DAC cables
For information about installing and removing SFP/SFP+ transceiver
modules and SFP+ DAC cables, see H3C SFP/SFP+/XFP Transceiver
Modules Installation Guide at www.h3c.com.