H3C Technologies H3C S9800 Series Switches - Manual (Page 3)

Manual version: 6PW101-20150202 BOM: 3105A02Y
iii
Figure 4 Attaching the slide rail to the cage nuts with screws
(1) Compress the slide rail, making sure the positioning tabs are inserted into the square holes
(2) Install fastening screws
TIP:
Install a screw in each mounting hole of the slide rail to ensure its weight bearing capacity.
5. Repeat steps 4 and 5 to install the other slide rail. Make sure the two slide rails are at the same
height so the device can be placed on them horizontally.