H3C Technologies H3C S10500 Series Switches - Manual (Page 66)

58
Section Description Remarks
(3) Power
module slots
• The S10504 has four power module slots.
• The S10508, S10508-V, and S10512 each
have six power module slots.
N/A
(4) Fan tray slot
• Located at the left rear of the chassis for
the S10504, S10508, and S10512.
• Located at the upper rear of the chassis for
the S10508-V.
Every S10500 switch comes with one fan
tray. You do not need to order fan trays.
(5) Switching
fabric module
slots
Both switching fabric modules and switching
fabric module slots have silver gray edges.
You must install at least one switching
fabric module.
You can install up to four switching
modules, and one of them must be installed
in one of the two lowest numbered
switching fabric module slots.
• For the S10504, you must at least install
one switching fabric module in slot 6 or
slot 7.
• For the S10508 or S10508-V, you must
at least install one switching fabric
module in slot 10 or slot 11.
• For the S10512, you must at least install
one switching fabric module in slot 14
or slot 15.
For more information about available cards, power modules, and fan trays, see " Appendix B FRUs and
compatibility matrixes ."
Weights and dimensions
Table 10 Switch weights and dimensions
Model Weight Height Width Depth
S10504 < 85 kg (187.39 lb)
353 mm (13.90 in)
(8 RU)
440 mm (17.32 in) 660 mm (25.98 in)
S10508 < 125 kg (275.57 lb)
620 mm (24.41 in)
(14 RU)
440 mm (17.32 in) 660 mm (25.98 in)
S10508-V < 145 kg (319.66 lb)
886 mm (34.88 in)
(20 RU)
440 mm (17.32 in) 660 mm (25.98 in)
S10512 < 165 kg (363.76 lb) 797 mm (31.38 in) 440 mm (17.32 in) 660 mm (25.98 in)