Ensemble Designs BrightEye 3 Analog to SDI Converter with TBC and Frame Sync - Manual (Page 14)

BrightEye 3 Analog to SDI Converter with TBC/FS
SPECIFICATIONS
Analog Input:
Number:
One
Type: Beta/SMPTE, Y, Pr, Pb
NTSC, PAL Composite
NTSC, PAL S-Video
Impedance: 75 Ω
Return Loss: > 40 dB
Input DC: +/- 1 volt DC
Input Hum: < 100 mV
Serial Digital Output:
Number: One
Type: 270Mb/s SD Serial digital
(SMPTE 259M)
Impedance: 75 Ω
Return Loss: > 15 dB
Output DC: None (AC coupled)
Analog to SDI Performance:
Bit Resolution:
12 bit input quantization
4 X oversampling
Signal to Noise: > 62 dB, weighted
Frequency Response:
Composite and Y
± 0.1 dB, 0 to 5.5 MHz
Pr, Pb ± 0.1 dB, 0 to 2.75 MHz
Minimum Delay: 90 µSec
Reference Input:
Number:
One
Type: 1 V p-p Composite Video
PAL or NTSC
Impedance: 75 Ω
Return Loss: > 40 dB
General Specifications:
Size:
5.625” W x 0.8 “ H x 5.5” D
(143 mm x 20 mm x 140 mm)
including connectors
Power: 12 volts, 7 watts
Temperature Range: 0 to 40 degrees C ambient
Relative Humidity: 0 to 95% noncondensing
Due to ongoing product development, all specifications are subject to change.
BrightEye-14