Ensemble Designs BrightEye 90-F HD Up/Down Cross Converter and ARC with AES Audio and Optical Output - Manual (Page 22)

BrightEye 90-F HD Up/Down/Cross Converter And ARC With AES Audio And Optical Output
BrightEye 90-F - Page 22
Aud Config
• Audio Mode – selects the mode of the module as Mux 4 (4 inputs and 4
outputs), Mux 8 (8 inputs), or Demux (8 outputs).
• Dig Ref Level – selects the digital reference level. This pulldown lets you
choose between: -20 dBFS or -18 dBFS.
• Peak Indicator – selects the amount of headroom to use in determining
peak levels. This pulldown lets you chose between: Clipping,
2 dB Headroom, 4 dB Headroom, 6 dB Headroom, 8 dB Headroom, or
10 dB Headroom.
• Anlg Ref Level – selects the analog reference level. This pulldown lets you
choose either -10 dBu or +4 dBu.
• Audio Delay – allows you to set the amount of audio delay from 0 to 1000
mSec. Default is 0 mSec.