Ensemble Designs BrightEye 90-F HD Up/Down Cross Converter and ARC with AES Audio and Optical Output - Manual (Page 12)

BrightEye 90-F HD Up/Down/Cross Converter And ARC With AES Audio And Optical Output
BrightEye 90-F - Page 12
OPERATION
Control and operation of the BrightEye 90-F is performed from the front panel or
remotely from a networked PC with the BrightEye PC or BrightEye Mac Control
application.
Some control settings are only available with BrightEye PC or Mac. These parameters
cannot be monitored or controlled from the front panel.
Front Panel Controls and Indicators
The front panel of the BrightEye 90-F, shown below, provides status and control
indicators for the unit.
Status Indicators
The following status indicators are provided on the front panel:
Embed In
Illuminates green when an embedded audio stream is detected on the
HD/SD
SDI/Cpst In video input BNC. This applies only to SDI signals.
AES In
Illuminates green when a digital audio signal is detected on any of the AES
digital audio BNCs.
Audio Mode
Indicates the currently selected audio I/O mode. Choices are
Mux 4 (4 inputs
and 4 outputs), Mux 8 (8 inputs), or Demux (8 outputs).
Gain (Audio)
These controls allow for quick adjustment of Gain level for the channel pairs.
Gain adjustment is done in conjunction with the VU indicators. For
independent channel adjustment, and other controls, use BrightEye PC or
Mac. The indicator illuminates green when the gain for a given audio channel
pair is set to nominal or unity setting, or red when set to other than unity.
NOTE :
BrightEye 90-F Front Panel