Ensemble Designs BrightEye 71 HD/SD 8 Channel Analog Audio Embedder/Disembedder - Manual (Page 7)

www.ensembledesigns.com BrightEye 71 and 71-F - Page 7
HD/SD 8 Channel Analog Audio Embedder/Disembedder User Guide TM BrightEye 71 and 71-F
REAR CONNECTORS
All connections to the BrightEye 71/71-F are made on the rear of the unit. Refer to the illustration and
detailed explanations below for a reference of the rear connectors.
Power Connection
Connect the modular power supply to the 12-volt DC power input connection on the far left of the
unit. Use the locking ring to secure it. If you don’t have the power supply already, contact Ensemble
Designs to purchase one.
USB Connector
Connect the USB port to a PC or Mac running BrightEye software for more comprehensive control,
diagnostics, and upgrades to the unit. BrightEye PC/Mac Control application software is included on
the CD that came with your unit, or the application can be downloaded here:
http://www.ensembledesigns.com/support/brighteye-support/
HD/SD SDI Out
This output is a digital stream that contains the original video signal.
When the module is configured as a multiplexer, the four Phoenix connectors are configured as inputs.
This external audio is multiplexed into the SDI output as desired.
When the module is configured as a demultiplexer, this output contains the original video and the
original embedded audio. The audio signals present in this incoming video signal are extracted and
delivered as outputs on the analog audio Phoenix connectors.
Analog Audio Connectors
The four Phoenix connectors are either analog audio inputs or outputs depending on how the unit is
configured (Mux or Demux). Each connector inputs or outputs 2 channels of audio (1 pair.) When the
unit is configured as Mux, the four Phoenix connectors are inputs. When configured as Demux, the
four Phoenix connectors are outputs.
HD/SD SDI In
This BNC input accepts an HD or SD SDI serial digital video signal with or without embedded audio.
When the module is configured as a demultiplexer, embedded audio present on this input stream can
be extracted, processed on the module, then output from the module on the audio outputs.
When configured as a multiplexer, external analog audio can be inserted into the SDI input stream or
replace existing embedded audio.