Ensemble Designs 7550 HD Legalizer - Manual (Page 24)

Use the Vid Out menu shown below to adjust the following parameters:
• Bypass – set to Normal or Bypass to completely bypass any digital processing.
• Vert Blanking – set the vertical blanking for Wide or Narrow.
• Test Pattern – select a test pattern to be sent to the video output of the module.
• Signal Mute – set to either mute the output to black when noise is present, to
freeze to the last frame, or select no muting.
• Strip Audio – select the box to strip embedded audio from the output. Leave the
box unselected to pass embedded audio through to the output.
The Memory menu shown below allows you to save overall module setups to five memory
registers as follows:
• Select Save, then one of the five memory registers Reg 1 – 5. The box will turn
green. The entire module setup is now saved in the selected register.
• To recall a register, select the register box. If there is information saved, the box
will turn green. The saved setup will now be loaded to the module. Up to five
different module setups can be saved and recalled using the individual registers.
Model 7550 HD Video Frame Sync
7550-24