Ensemble Designs 7550 HD Legalizer - Manual (Page 15)

Avenue PC Remote Configuration
The Avenue PC remote control menus for this module are illustrated and explained below.
Refer to the 7550 Parameter Table for a summary of available parameters that can be
set remotely through the menus illustrated. The Configuration Summary gives tips
and general background information on setting the parameters. For more information on
using Avenue PC, refer to the Avenue PC Control Application Software data pack.
Parameter fields that are grayed out can indicate one of the following conditions:
• An option is not installed.
• The function is not active.
• The module is locked.
• The User Level set with Avenue PC is not accessible from the current User Level.
7550 Avenue PC Menus
The Vid In menu shown below allows you to configure the following input sources:
• Ref Source – use this control to set the reference input source.
Status reporting is provided for the following conditions:
• Input – reports the input status as No Input, 720p/50, 720p/59.94, 720p/60,
1080i/50, 1080i/59.94, 1080i/60, 1080p/25, 1080p/23.98, 1080p/24, 1080sF/25,
1080sF/24, 1080sF/23.98, SD 625, SD 525, or Unknown Std.
• Input Error – reports one of the following errors: No Error, No Input Lock,
EDH/CRC Error, and TRS Error.
• Error Seconds – displays the number of seconds that a detected EDH error has
been present in the serial data stream.
• Reference – reports the status of the reference input as either No Reference,
Ref Mismatch, Ref Unlocked, Ref 525 Lock, Ref 625 Lock, or TLS Lock.
7550-15
Model 7550 HD Video Proc Frame Sync