Ensemble Designs 5230 Digital to Analog Video Converter and Disembedder User Manual
Page 35
The Blanking menu shown below allows you to adjust the output blanking of the module
with the following controls:
•
Mode – set the blanking mode to Narrow (lines 1-9 are blanked in NTSC, lines
1-6 in PAL), Wide (lines 1-20 in NTSC, lines 1-22 in PAL), or Custom.
In Custom mode you may select which lines are blanked on a line by line basis in
Field 1 and Field 2. A green box indicates the line is blanked. In NTSC, there are
individual blanking controls for each line starting with 10 ending with 21. In PAL,
there are blanking controls for lines 7 and 8 as one group (both passed or both
blank) and individual blanking controls for each line starting with 9 ending with
23.
•
V Bit Pos – in 525 mode only. Set the position of the vertical bit in the SDI output
to Line 10, Line 20, or Line 23.
5230/6230-35
Model 5230/6230 Video Audio DAC