Ensemble Designs 5230 Digital to Analog Video Converter and Disembedder User Manual
Page 31
Use the Aud In menu shown below to adjust the following parameters:
•
1/2 Input – select the input audio source for Input 1/2.
•
3/4 Input – select the input audio source for Input 3/4.
•
1/2 Mode – for a Serial input with embedded audio, select the type of audio in the
stream:
•
Audio – the embedded stream is standard audio.
•
Auto – the module will detect the type of audio embedded in the stream.
•
3/4 Mode – select the type of audio in the serial stream as described above.
•
Demux Group – select the embedded audio group to demultiplex from the selec-
tions. The status of embedded audio is shown in the Embed In view.
The status of the corresponding audio inputs are shown next to the control. Status is
reported as one of the following:
•
No Input – no serial digital embedded audio is detected.
•
Audio Sync – the audio embedded in the stream is synchronous with the timing
reference.
•
Audio Async – the audio embedded in the stream is non-synchronous with the
timing reference.
Model 5230/6230 Video Audio DAC
5230/6230-31