Eneo PNR-5304/4TB - Manual (Page 80)

Part 6 - Appendix
80
Notes on first-time operation of ONVIF IP cameras
(PX, PT, NX series)
To ensure the ONVIF IP camera operates perfectly together with recorders in the PNR-53xx series, set these parameters
in the camera Setup:
1
Reset the camera to factory settings if it was already in operation.
2
Network Setup: Manual IP address / DHCP Client
3
Alarm Functions: Setting for Motion Detection and Alarm Contacts (I/O)
4
Audio Function: On/Off
5
Compression standard: H.264 (all streams)
6
Resolution e.g.: Stream 1 @ 1920x1080; Stream 2 @ 704x576;Stream 3 @ 320x240
After these settings have been made, the camera registration can be carried out.
For detailed information on setup of your IP camera, refer to its product documentation.
Please make sure that the total power consumption of the connected cameras does not exceed the maximum power
output of the PoE switches integrated on the NVR. Power to the PoE switches is by means of a separate power supply.
Output PoE PNR-5316 / PNR-5308: Ports 1~4 max. 37W, Ports 5~8 max. 37W
Output PoE PNR-5304: Ports 1~4 max. 74W