Eneo PNR-5304/4TB - Manual (Page 43)

Part 3 - Configuration
43
Schedule
Disabling Schedule On suspends schedule recording
regardless of the schedule and displays the
icon on
the upper left corner of each camera screen. Pressing
the Panic button displays the
icon and commences
panic recording.
Set Record Schedule mode as Simple Mode or
Advanced Mode. Advanced Mode allows you to
configure a unique recording schedule for each event.
Select the icon to delete a schedule.
• Changing the recording schedule mode suspends
all active event-linked actions.
• Select the + button on the bottom left of the screen
to add a schedule. Select Day to specify the Day
setting or select All. Select Scope to specify the
time frame.
Simple Mode Options
• Mode: Select No Record, Time, Event, or Time &
Event.
No
Record
Unless the Panic button is pressed, no
recording will take place during the
scheduled time frames on the scheduled
days.
Time
The icon appears on the upper
left corner of the screen. The icon
appears at scheduled times to indicate
recording is in progress.
Event
The icon appears on the upper
left corner of the screen. The icon
appears when the specified event occurs
to indicate recording is in progress.
If Pre-Event is enabled, the and
icons appear when recording is
not in progress, or the and
icons appear when an event occurs
and recording is in progress.
Time &
Event
The icon appears on the upper left
corner of the screen and recording
commences as per the video profile
selected for time under Setup. When an
event occurs, the icon changes into
(red) icon and recording commences as
per the video profile selected for events
under Setup.
• Channel: Select which cameras to apply the schedule
to.
• Settings: Select to configure default recording profile
values for Time Lapse and Event Recording modes.