Eneo PNR-5304/4TB - Manual (Page 12)

Part 1 – Introduction
12
1 USB Ports
• Storage Device Connection
Connect an external USB hard drive or a USB flash
memory device to one of the USB ports for use with
the Clip Copy feature. The external storage device
should be placed as close to the NVR as possible. It is
recommended that you use a connection cable that is
no longer than 180cm in length. Use the connection
cable included with your external storage device to
connect the device to one of NVR's USB ports. For
more information Clip Copy, refer to the 5 Clip-Copy
on page 67.
• Peripheral Device Connection
Use the USB ports to connect peripherals such as a
USB mouse to the NVR. You can also use a USB-to-
serial converter and connect multiple text-in devices
to the NVR at the same time.
For USB flash memory devices, the NVR supports
the FAT32 file format only.
2 Camera Button
Pressing the Camera button while in Live or Playback
mode displays images from the selected camera in full
screen. To select a camera whose channel is made up
of two digits, enter the digits in sequence using the
number keys.
3 LEDs
• HDD LED: Flashes when data is being written on
the HDD or a video search is in progress.
• Alarm LED: Lights up in red when an alarm event
occurs.
4 Panic Recording Button
Pressing the PANIC
button displays the icon and
commences recording irrespective of the current
schedule.
Press the button again to deactivate Panic Recording
mode.
5 Alarm Button
Pressing the ALARM button while the alarm has been
activated resets all NVR outputs, including the built-
in buzzer. Pressing the button while the alarm is off
displays the event log on the screen.
6 Search Mode Button
Pressing the SEARCH button initiates Search mode,
which will allow you to search for and play back video
recordings.
Pressing the SEARCH button while in Search mode
returns the screen to Live mode.
7 Display Button
Press the DISPLAY button to toggle screen formats.
8 PTZ Button
Pressing the PTZ button initiates PTZ mode, allowing
you to control PTZ cameras.
In PTZ mode, use the arrow buttons to move the
camera up, down, left, and right.
1
2
3
4
5
6
Zoom-In
1
2
3
4
5
6
Zoom-Out
1
2
3
4
5
6
Focus Near
Focus Far
Preset View
1
2
3
4
5
6
Preset SET
9 Menu Button
Pressing and holding the MENU button for 3 seconds
while in Live mode displays the Live menu.
Pressing the MENU button while in Search mode
displays the Search menu.
Press the button once more to close the menu.
Pressing and holding the MENU button for 3 seconds
while in Playback mode activates One-Touch mode
and displays the clip copy window.
0 Arrow and Playback Control Buttons
These buttons are used to select menus and options.
Play/Pause
(") Buttons
Plays the video in normal speed
and displays r on the screen.
Press
again during playback to
pause the video and display on
the screen.
Setup Menu
Up/Down/Left/Right Buttons:
Moves the focus up, down, left,
or right.
Up/Down Buttons: Increases or
decreases values.
1
2
3
4
5
6
1
2
3
4
5
6