Eneo AVU-8/2EC - Manual (Page 7)

7
1 T35mA Fuse holder for T 35mA fuse
2 Ch A BNC socket of the video output of ChANNEL A, for connecting to the main monitor
3 Ch B BNC socket of the video output of ChANNEL B, for connecting to a video recorder with an
optional CLOCK output
4 ALARM IN 9 pin plug for alarm input or remote control. Connection of up to eight alarm sensors is
possible. Either the alarm inputs or the remote control can be activated through the 9 pin
plug. Setting in the menu. Remote control is effected through keys which are attached
to the alarm socket.
5 CLK/GND Terminal socket for the VCR-CLOCK input. If a video recorder with a CLOCK output is used
and connected to the VCR-CLK input, the sequence is switched from ChANNEL B by the
clock impulse. The VCR-CLOCK input must be activated in the SETUP.
6 ALM/GND Alarm output terminal socket (NO= output with open collector). It is suitable for connection
to a video recorder with alarm input.
7 VIDEO IN BNC sockets for video inputs. Up to eight video cameras or other video sources can be
connected here.
8 AC IN 30VAC mains input
Rear side
MON
VCR
CAM 4 CAM 8
CAM CAM 6
ALARM
SENSORS
or REMOTE
CONTROL
T and T
MAINS PLUG
CAM 3 CAM 7
CAM CAM 5
3.3 Possible connections
Note:
Take care that the mains plug is withdrawn before you connect other apparatus or open the device.
AVU-8/2AL-2