Eneo AVU-8/2EC - Manual (Page 4)

4
2. AVU-8/2EC
2.1 General description
• Sequential switcher with 8 inputs/ outputs in desktop casing
• 8 video inputs
• outputs (A: monitor and B: VCR)
• Outputs can be programmed manual or as sequential output
• Vertical interval switching
• Dwell time can be set
• Bypass function
• Operating voltage AVU-8/EC: 5VAC, 300mA, 4.5VA
2.2 Description of functions
1 ChANNEL Key for selecting ChANNEL A or B, for operating with the keys TIME, MODE or -8.
2 MODE Key for selecting the ”Auto” (sequence) or ”Manual” mode.
In ”Manual” mode, the LEDs -8 show the selected input which is switched to ChANNEL A
or B.
In ”Auto” mode, the LEDs -8 show the current input of the selected ChANNEL A or B.
By pressing one of the keys -8, the LEDs show the active inputs. The inputs are switched
off by pressing the selected keys from -8.
After this procedure, the device reverts to normal operation.
If all inputs are switched off, the switcher automatically switches to the first input.
3 TIME Key for selecting the dwell time. If the selector key UP or DOWN is pressed the LEDs -4
show the selected dwell time. Every time the TIME key is pressed, the dwell time is
increased or decreased by second.
4 VIDEO INPUTS Keys for selecting the input in ”Manual” mode operation or for switching the inputs off in
-8 ”Auto” mode.
Frontside
TIME (sec) LED1 LED2 LED3 LED4
1-7 OFF OFF OFF OFF
8-15 ON OFF OFF OFF
16-23 OFF ON OFF OFF
… … … … …
120 ON ON ON ON