Operating instructions, Using osd controller – Eneo PXB-2280Z10 D User Manual
Page 12
Operating Instructions
12
NETWORK AF ZOOM CAMERA
Setup menu can be accessed and controlled by OSD control joy stick on the
side of camera unit.
Five commands are available with the joy stick.
The design of OSD could be different according to the Model.
Using OSD controller
Description of the joystick operation
1) MENU Key (●) : Access to the OSD menu or enter the setting.
2) UP/DOWN Key (▲/▼) : Choose the desired sub-menu and to move
the cursor up or down.
3) LEFT/RIGHT Key (◄/►) : Set up the value of the selected menu.
Used to adjust the desired menu selection and to move the cursor left
or right.
Description of the ZOOM&FOCUS* adjustment
1) ▲ : Zoom In
2) ▼ : Zoom Out
3) ◄ : Focus Near
4) ► : Focus Far
OSD Control
Joy Stick
IP RESET
Standard
SD Card Slot
Video Sub-out Connector
Cover Open
(*) Works only when OSD Menu is inactive and IP is not connected.