Eneo NXC-1404F03W - Manual (Page 25)

25
DE
EN
FR
PL
RU
Network Camera Setup
This section describes how to configure the network camera, and is inten-
ded for product Administrators, who have unrestricted access to all the
Setup tools; and Operators, who have access to the settings for Basic, Live
View, Video & Image, Audio, Event, and System Configuration.
You can configure the network camera by clicking Setup in the top right-
hand corner of the Live View page. Click on this page to access the online
help that explains the setup tools
When accessing the Network Camera for the first time, the “Admin Pass-
word” dialog appears. Enter your admin name and password, set by the
administrator.
Note: If the password is lost, the Network Camera must be reset to the
factory default settings.
See “3.6 Resetting to the Factory Default Settings”.
Resetting to the factory settings
To reset the Network Camera to the original factory settings, go to the
Setup>System> Maintenance web page (described in “3.5.4 System >
Maintenance”) or use the Reset button on the network camera, as descri-
bed below:
t