Eneo NXC-1404F03W - Manual (Page 18)

18
Installation
NO Name Description
4 Network
Connector Ethernet, RJ-45 port compatible with 10/100Mbps having
PoE functionality. Modular Jack
5 Power
Connector For connection of the 5V power adapter (included).
6 Reset
Button Press and hold the Reset Button for one second using a
paper clip or thin object. Wait for the camera to reboot.
7 WPS Button WPS(Wi-Fi Protected Setup) Button, it finds and connects a
wireless AP device automatically.
8 Network LED
(Green) Steady for connection to a 100Mbit/s network. Flashes for
network activity.
9 Power LED
(Green) Steady green for normal operation or booting.
Flashes green during firmware upgrade.
10 Status LED
(Red) Steady red for failed upgrade or booting.