ATL Telecom OM25 - Manual (Page 34)

ATL User Guide
OM25 O
Optical M Modem
34
6.6 CONFIGURATION
6.6.1 MASTER/SLAVE CONFIGURATION
The OM25 unit default setting is as a slave.
In order for a pair of units to operate correctly, one end must be set as a master, the other end as
a slave. Normally the unit connected to the customer will be configured as a slave.
l
OM25
Thu 01 Jan 1970 00:00:43
Configuration > System Operation
Urgent Alarm:On Non-Urgent Alarm:On
Management Mode
Master ( )
Slave (* )
Independant ( )
DSL Gender
Co (*)
Cpe ( )
Manangement Mode changes will cause unit to reboot
F1 Help F3 Previous Menu F4 Main Menu
Configuration Master/Slave
User Port
Master / slave configuration
Configure User Port
System
Subsystem Names
Monitoring
Reboot
Serial Communications
Front Panel
Allows you to reboot the system
Set date, time and menu timeout
Enter name, description and location of this unit.
Configures monitoring mode
Terminal set-up - baud rate, parity and handshake
Allows configuration of Front Panel controls