ARM Electronics NDVR16 - Manual (Page 45)

Run in full screen mode: Full screen monitor display.
Receive events: When alarm and motion and video loss, the DVR status will display.
8 PTZ control. This function is not available.
SAVE OPTION:
Choose the hard disk path where you are going to save.
2. Search recorded pictures via IP network
Function of each button in search window:
1 : Power switch. Press power switch to quit.
2 : Full screen button. Press full screen button to search recorded picture channel by channel in full
screen.
3 : Quad button. Press Quad button to search recorded pictures in quad screen. 4 pictures from 4
channels at the same time.
45
4 : Time of recording. It indicates when the pictures you see recorded.
5 : Channel selection button. Press any one from 1 to 4 to see picture of corresponding
channel, if you first chose full screen button ( 2 ).