ARM Electronics NDVR16 - Manual (Page 11)

5.) SEL (Select)
>On the 13 / 9 / 4 split screen, press SEL can change the each channel order.
-
Press SEL button to active the selection function.
- Turn the inner-shuttle or button to select the desired camera channel in split-1.
- Press change button to change the split-screen position.
- Press SEL button again to cancel the selection function.
6.) Alarm Sensor Recording
>See the alarm recording setup page
7.) Scheduled Recording
>See the scheduled recording setup page
8.) Motion detection Recording
See the motion detection recording setup page
9.) Key Lock function
On the Live or Playback mode, press (lock),
Only, numeric, freeze, auto, pip, and zoom buttons could work. Press lock key again to enter the login-in
window. Enter admin or user password to unlock.
10.) AUDIO BUTTON
AUDIO CONTROL
CH +
VOL +
CH: choose which audio channel output
VOL: Audio volume values change.
CH -
VOL -
Notice
1> Recording is stopped during playback.
2> Recording is not possible if no camera is connected.
3> DVR must be not on the PLAY mode, if user wants to remote view in the Internet.
11