ARM Electronics RT4CD - Manual (Page 48)

45
General General
c Get the information of DVR firmware
version in this window.
d Select Select “ “ Turbo Step Turbo Step ” ” (1 (1 - - 10) 10).
To speed up menu selection or the
control of the PTZ camera under video
web servers, users can activate "Turbo"
function by clicking this button. Users are
allowed to change the turbo steps from 1
to 10.
Ex: If the value of the turbo step is "5", it
means that when users press one of the
button up/down/left/right, one click is as
clicking 5 times.
e MAX LOG LIST MAX LOG LIST:
Set the maximum number of log list.
f Server Log Server Log:
Press “Server Log” button to enter the
server log list window.
g Title Title:
Name the title which will be shown on the
top of the AP live viewer (up to 15
characters).
Alarm Alarm
c Alarm Trigger Alarm Trigger:
Enable or disable Email and FTP
notification function.
d Alarm Method Alarm Method:
Two notification methods
— Email and / or FTP.
e Post Numbers Post Numbers:
Set MJPEG pictures (1-10
pictures).
f Alarm Duration Alarm Duration:
Set the duration time of motion
trigger recording (5 SEC, 10 SEC,
20 SEC, 40 SEC).
g Alarm Refresh Alarm Refresh:
Clean the alarm message “ ”
which is shown on the screen.
Note: Note:
Email Notification:
MJPEG pictures will be made at your designated
space set in “File Path”, plus an e-mail contained
with the MJPEG pictures (1-10 pictures) to be
sent to the address which is set under “Mail”.
FTP Notification:
MJPEG pictures will be made at your designated
space set in “File Path”, plus a FTP file contained
with the MJPEG pictures (1-10 pictures) to be
sent to the address which is set under “FTP”.
4CH DVR
4CH DVR