ARM Electronics RT4CD - Manual (Page 23)

20
4.8 ADVANCE MENU ___DISPLAY 4.8 ADVANCE MENU ___DISPLAY
Move the cursor to “DISPLAY” and press ”ENTER”. The screen will show the
following options.
DISPLAY DISPLAY
TITLE DISPLAY ON
DATE DISPLAY ON
HDD INFO ON
LOSS SCREEN BLUE
PLAYBACK INFO NORMAL
DWELL DURATION (SEC) 2
DE-INTERLACE ON
MONITOR OUT MAIN
OSD SETUP
WATERMARK ON
1) TITLE DISPLAY:
Turn the channel title display on / off.
2) DATE DISPLAY:
Turn the date display on / off.
3) HDD INFO:
Turn the information display of internal HDD on / off.
4) LOSS SCREEN:
Set the color of the video loss screen (Blue or Black)
5) PLAYBACK INFO:
Set the position where playback information will be indicated
(center or normal (on the button of the left-hand side of the screen)).
6) DWELL DURATION (SEC):
Set the duration time of each channel for CALL MONITOR (2, 4, 8, 16 secs.)
7) DE-INTERLACE:
Set the “DE-INTERLACE” function on / off.
8) MONITOR OUT:
Select Select "MAIN" when the video output device is CRT monitor.
Select "VGA" when the video output device is LCD monitor.
Note: If the connected video output device is LCD monitor, but the setting here is "MAIN", motion
detection area setting will be disabled.
9) OSD:
Set the customized OSD color.
10) WATERMARK:
In the playback mode of the software AP, users could proof the authenticity of the BACKUP
VIDEO. If the BACKUP VIDEO had been modified, the video image will turn to
light red light red and
the playback will be paused.
Please refer to P. 35 for detailed instructions.
Note: This function is always on and non Note: This function is always on and non - - switchable. switchable.