Alternative method to unblock the sim card, Blocked. contact card provider is displayed, Enter puk2 is displayed – Ericsson GH388/GF388 User Manual
Page 51: Emergency calls only is displayed, No network is displayed, Keylock is displayed, To unlock the keypad, Indicator light blinks red
![background image](/manuals/79463/51/background.png)
If you entered both the unblocking key and the
PIN code correctly, the message New PIN
appears.
Alternative method to unblock
the SIM card
Card
blocked
Unblock?
To unblock the SIM card, enter the following
sequence:
* *
0 5
*
UNBLOCK KEY
*
NEW PIN
*
NEW PIN
#
BLOCKED.
Contact card provider
is displayed
BLOCKED
Contact card
provider
The SIM card is permanently blocked after the
unblocking code has been entered incorrectly
ten times in succession. Contact your network
operator or service provider.
Enter PUK2 is displayed
Enter
PUK2
The PIN2 code has been entered incorrectly
three times in succession.
Enter your personal unblocking key 2 (PUK2)
and press #.You obtain your PUK2 from your
network operator or service provider.
Enter
new PIN2
Enter the PIN2 code and press
#
. You can
either enter the current PIN2 code, or a new
one.
Repeat
new PIN2
Enter the PIN2 code again and press
#
.
If you entered both the unblocking key and the
PIN2 code correctly, the message New PIN
appears.
Emergency calls only is displayed
Emergency %
calls only&
09:58
A network is in range but you are not allowed to
use this network.
You may, however, call the emergency number
112.
No network is displayed
No network%
&
18:10
This indicates that no network is in range. The
reason for this is either:
a. You are in an area which is not covered by
a network.
b. The received signal is too weak. You have
to move to obtain a sufficiently strong signal.
Handsfree phone in a vehicle:
Ensure that the phone is properly inserted in its
holder.
Check the external antenna and its connection.
Keylock is displayed
" A NET %
19:20 &
~Keylock
The keypad is locked to prevent unintentional
key action.
To unlock the keypad
Press
L
, followed by YES.
Indicator light blinks red
This indicates that the battery is becoming
exhausted and soon needs recharging or
replacing.
Supplementary Information
EN/LZT 126 1298 R1A
51