Ericsson GH388/GF388 - Manual (Page 25)

Press YES.
Enter
PIN
Enter your PIN and press
#
.
Unlocked
The card lock is now turned off.
CHANGE PIN CODE
To change the PIN code
–
Change PIN code
ACCESS
~ Change 
PIN code
Press YES.
Enter
old PIN
Enter the current PIN and press
#
.
Enter
new PIN
Enter the new PIN and press
#
.
Repeat
new PIN
Enter the new PIN again.
New
PIN
The PIN has been changed.
If the message Matching error appears, the
new PIN was entered incorrectly.
If the message Wrong PIN appears, followed
by Enter Old PIN, the old PIN was entered
incorrectly.
If the old PIN is entered incorrectly three times
in succession, the SIM card will be blocked.
This is indicated by the message Card
blocked Unblock? Should this happen, refer
to chapter 28. Problems You Can Solve at
the end of the manual.
CHANGE PIN2 CODE
To change the PIN2 code – Change
PIN2 code
ACCESS
~ Change 
PIN2 code
Proceed as described above under CHANGE
PIN CODE.
PHONE LOCK
The phone lock protects the phone against
unauthorised use of the phone in the event of a
theft. You can read more about it in chapter 4.
Protecting the SIM Card and the Phone.
The phone lock is not activated when you
purchase the phone. You should, however,
activate it as soon as possible.
To lock or unlock the Phone – Phone
lock
ACCESS
~Phone lock
(Unlocked)
The current setting Full Lock, Autolock or
Unlocked is shown between brackets.
Press YES.
PHONE LOCK
~ Unlocked 
If necessary, scroll with
R
/
L
to desired option:
Full lock, Autolock or Unlocked.
When the desired option is displayed, for
example Autolock, press YES to select it.
Enter
lock code
Enter the security code and press
#
.
When the phone is delivered, it is programmed
with a security code of 0000.
Phone lock is displayed, together with the new
setting: Full Lock, Autolock or Unlocked.
Menus
EN/LZT 126 1298 R1A 25