ARAG ORION Tank filling system - Manual (Page 8)

8
4.2.3 "MODE" Operation mode
It is possible to set three different operating modes:
MOde 0 = Tank filling count with pump stop control (0000 ÷ 9999 EU: l [predefined setting] - US: Gal).
MOde 1 = Flowrate display.
MOde 2 = Tank filling count with pump stop control (0 ÷ 999,9 EU: l - US: Gal).
Access the "OPT" Advanced menu as shown in Par. 4.2.2.
1) Press in succession to display the enabled operation mode; the value alternates with the message
"MOde".
2) To modify the value, keep the keys pressed simultaneously until
"Set" screen appears.
3) Press in succession to select the mode you wish to use.
4) To confirm the setting, keep the keys pressed simultaneously until
"Save" screen appears.
The display alternatively flashes the set operation mode and "MOde" screen.
4.2.4 "UNIT" Unit of measure
It is possible to choose the units of measure for displaying data:
eu = europa (l - l/min) [predefined setting].
uS = uSa (gal - gpm).
Access the "OPt" Advanced menu as shown in Par. 4.2.2.
1) Press in sequence to display the type of current unit of measure; the value alternates with the message
"unit".
2) To modify the value, keep the keys pressed simultaneously until
"Set" screen appears.
3) Press to select the unit of measure you wish to use.
4) To confirm the setting, keep the keys pressed simultaneously until
"Save" screen appears.
The display alternatively flashes the set unit of measure and the "unit" screen..
1 2 3 4
1 2 3 4