ARAG ORION Tank filling system - Manual (Page 7)

7
4 uSe
4.1 Switch On
Upon start-up, the tank filling system performs a diagnostic test, then displays the following infor-
mation in sequence:
• Software version;
• Unit of measurement;
• Indicator of data displayed.
4.2 Preliminary setup for use
4.2.1 Notes on programming
After having modified a parameter in the "OPT" Advanced menu, to return to the Main menu turn
the device off and then on again.
When you are modifying a parameter or are in a Menu other than the Main menu and you do not
press a key within 10 seconds, the display will automatically return to the Main menu.
When modifying a numerical value, keep the key pressed to enable quick modification.
4.2.2 "OPT" Advanced menu
Upon installation of the flowmeter in the filling system some settings are
needed to properly display the filling data:
• Operation mode
• Unit of measure
• Valve operation time
To access the Advanced menu, keep the key pressed
while switching On
the device until the "OPt" screen appears.