Aq -d m -4, Listening to fm radio, Location of controls – Aquatic AV AQ-DM-4B User Manual
Page 8

7
www.aquaticav.com
LISTENING TO FM RADIO
ENTER FM RADIO MODE
TO SCAN OR NAVIGATE CHANNELS
FM radio is only available when you are in the FM Radio Mode.
If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as
shown on the remote LCD.
SAVING RADIO CHANNEL TO MEMORY
LISTENING TO SAVED RADIO MEMORY
1. Press (FAST REWIND) or (FAST FORWARD) to seek another station.
2. Press and hold either (FAST REWIND) or (FAST FORWARD) for manual tun-
ing back or forward.
1. Press or or button once to listen to the station stored in button.
1. Press (MODE) on remote control to switch to FM radio model.
1. If you want to save the current frequency into memory, press and hold or or
for more than 2 seconds. The station will be stored the to relevant button or or
LOCATION OF CONTROLS
A
Q
-D
M
-4
4
www.aquaticav.com
WATER/DUST PROOF DIGITAL MEDIA LOCKER™
Digital Media Locker Knob and Protective Door
ON/OFF Button
Water/Dust Protection Inner Gasket
3.5mm AUX Input Jack for MP3 Devices
ON/OFF Power LED
Security Strap for Digital Media Devices (MP3/iPod)
iPod 30-pin Connector
Item Description
1.
2.
3.
4.
5.
6.
7.
SWITCH BETWEEN US & EURO FM MODES
US mode will increase and decrease the FM frequency in steps of 0.1 MHz, e.g. 88.5,
88.6, 88.7 MHz. EUR mode will increase and decrease the FM frequency in steps of
0.05 MHz, e.g. 88.25, 88.30, 88.35 MHz.
1. Make sure dock and remote are turned on and in ‘RADIO’ mode.
2. Hold down the (AUDIO) button for 3-5 seconds.
3. The remote will display ‘AREA USA’ or ‘AREA EUR’ depending on which tuning mode is
currently selected.
4. Use the +/- arrows to switch between US or European modes.
5. Press (PLAY/PAUSE) to select the desired tuning mode.
6. Once you switch modes it will default to the FM station stored in ‘PRESET 1’.