AML M5900 Portable Batch Data Terminal - Manual (Page 55)

48
Set Date & Time
The “Date/Time” function sets the M5900 portable data terminal’s internal clock. These
setting are saved even if the unit is powered off. The date and time set on the terminal can
be used to “time stamp” data when it is collected.
Adjust Contrast
The contrast can be set by selection the “Contrast” function from the M5900 Settings
Menu. The 3(left) and 4(right) arrow keys can be used to fine-tune the contrast.
The scroll bar below the M5900 Settings Menu window shows the current contrast level.
The [ENTER] key will save the changes to the permanent flash memory and [ESC] will
abandon changes.