AML M5900 Portable Batch Data Terminal - Manual (Page 19)

12
The M5900 Communications Ports
The M5900 has two types of communications ports on the bottom of the unit.
The two ports are shown here.
Description of the RJ-45 10 Pin Connector (RS-232)
1. 5 VDC (out to handheld tethered scanner)
2. RxD (in to terminal)
3. TxD (out from terminal)
4. RTS (out from terminal)
5. GND
6. Battery Charge (in to terminal)
7. CTS (in to terminal)
8. UDC+ (USB data +)
9. UDC – (USB data -)
10. Battery Out (from terminal)
Description of the USB Type II Connector (Slave only)
1. 5 VDC
2. Data -
3. Data +
4. GND
10 9 8 7 6 5 4 3 2 1
4 3
1 2
Note:
A standard 8-pin
Ethernet connector
can be used to
connect the M5900 to
an RS-232 serial port
printer. In this case
the 2 outside pins (1
and 10) are not
connected. Use the
chart and example on
the right to determine
the pin-out.
1. RxD (in to terminal)
2. TxD (out from
terminal)
3. RTS (out from
terminal)
4. GND