Symbologies – AML M5900 Portable Batch Data Terminal User Manual

Page 32

Text mode
Original mode

Turns off Laser / CCD after (1 – 9) seconds when the trigger is pushed in Pulse mode, or
held down in Trigger mode. The laser / CCD will always turn off immediately after a
good read.

<--> Read Verify

Performs bar code re-reads the number of times (0 – 9) required for applications where
accuracy is critical. This is used where the bar code is poorly printed or damaged.

Symbologies

The “Symbology Settings” function allows you to make changes to each individual bar
code.

CODE 39

Full ASCII

Enable the Full ASCII Extension to Code 39. This allows the scanner to
read upper and lower case characters as well as extended special
characters.

OFF* Disable the Full ASCII Extension to Code 39. This sets the reader to the

standard Code 39 mode.

Mod 43 Chk Digit