Amer Networks WAP334NC User Manual
Page 8
7
QIG 1/2013
Step 7: Select Static and set the same static IP configuration on
the CloudCommand interface as in the AP. Both settings will
match, and the connection will be made.
Alternately, select Local. This setting allows the AP’s local
configuration to be used and accepted by CloudCommand to
connect to the network.
Step 8: Connect the AP to the local area network.
It will
automatically receive its configuration from CloudCommand as it
connects to the Internet. Configuration requires
several minutes.
The AP becomes operational with its status changes to indicate it is
properly functioning.