Amer Networks WAP334NC - Manual (Page 12)

11
QIG 1/2013
Step 3: Deregistering and Re-Registering
‐ De-register the AP:
‐ Make note of the AP’s Unit Identification Code (UIC )
number for the problematic AP.
‐ In CloudCommand, under the Network Manager tab,
Access Point sub-tab, select the AP and click Actions.
‐ From resulting dropdown menu, select Deregister. The
deregistered AP should now have disappeared from the
status line.
Re-register the AP:
‐
In CloudCommand, click the New Access Point link located
in the left menu bar.
‐
Follow the instructions in the dialog boxes that appear.
‐
Connect the AP to the network using the Ethernet cable then
plugging the power cord in. If the network has Power over
Ethernet (PoE), just connect the Ethernet cable to the AP.
‐
The AP requires several minutes to self configure. The
status should progress from Registered to Starting to
Updating to OK.