Allmand Brothers MAXI LITE II - Manual (Page 73)

7-2 TROUBLESHOOTING
TROUBLESHOOTING
Before performing any troubleshooting procedures,
read the following safety messages and read the
chapter on “
SAFETY ” on page 2-1
For engine and generator troubleshooting, refer to the
Engine Operator’s Manual and Generator Operator’s
Manual or contact your dealer.
Always follow the electrical component manufacturer’s
specifications for voltage and test procedures
WARNING
ELECTROCUTION HAZARD
Only qualified, licensed electricians should service or
perform replacement procedures on the electrical
components. Ballast and capacitors are capable of
discharging high voltage. Always use appropriate
personal safety clothing and gear when servicing
electrical components.
WARNING
ELECTROCUTION HAZARD
High voltage is present when the engine is running.
Never attempt to service electrical components while
the engine is running.
WARNING
ELECTROCUTION HAZARD
Do not operate the light tower if the insulation on the
electrical wiring is cut or worn, or if bare wires are
exposed. Repair or replace damaged wiring before
starting the engine.