Allmand Brothers MAXI LITE II - Manual (Page 29)

3-4 USING THE LIGHT TOWER
To level and stabilize the trailer:
1 Position the Maxi-Lite II on a suitable site. See “ WORK
SITE CONSIDERATIONS ” on page 3-2.
2 Block both sides of each wheel with wheel chocks.
3 Extend the outriggers and lock them into place.
4 Pull out the jack lock pin, then rotate the stabilizer
jacks into position (perpendicular to the ground).
Release the lock pin to lock them into place.
5 Adjust each stabilizer jack and the tongue jack to
achieve proper leveling. Turning the handles
clockwise will raise the jacks and counterclockwise
will lower the jacks.
WARNING
ROLLOVER HAZARD
All stabilizer jacks must be in firm contact with a flat,
level, solid ground surface.
Outrigger
lock pin
Jack lock pin
Jack handle
Outrigger
Front outrigger
and jack
Outrigger
lock pin
Jack lock pin
Jack handle
Outrigger
Rear outrigger
and jack
Jack handle
Safety chains
Safety decal
Tie down loop
Ball hitch
coupler
Lunette ring