Allmand Brothers MAXI LITE II - Manual (Page 43)

4-6 MOVING THE LIGHT TOWER
The trailer’s safety chains prevent the trailer from
completely detaching from the towing vehicle when
underway.
Before trailering, read “ BEFORE TRAILERING OR
TRANSPORTING ” on page 4-3 .
To connect the light tower to the tow vehicle:
1 Connect the tow vehicle hitch to the trailer coupler.
Make sure that the coupler is securely attached to the
tow vehicle’s hitch.
2 Connect the safety chains to the vehicle’s hitch frame
and crisscross the chains under the trailer tongue to
prevent it from dropping to the road if the trailer
separates from the hitch ball. Rig the chains as tightly
as possible, with enough slack to permit free turning.
Vehicle hitch
Latch and release lever
Trailer coupler lunette ring
Latch
lever safety pin
Typical Lunette Ring Pintle-Type Hitch and Coupler
Latch and
release lever Trailer
coupler
socket
Coupler clamp
Vehicle hitch
and ball Latch lever
safety pin
Typical Ball-Type Hitch and Coupler
NOTICE
Safety chains must be rated at the same or greater
weight capacity as the trailer’s GVWR.