Alinco DR-SR8 - Manual (Page 88)

86
Chapter 7 Maintenance
7.2 Fuse replacement
If a fuse blows or the unit stops functioning, try to fi nd the source of the problem, and replace
the damaged fuse with a new, rated fuse.
CAUTION: Disconnect the DC power cable from the transceiver when changing a fuse.
The DX-SR8 has 2 types of fuses installed for transceiver protection.
• DC power cable fuses ..................Blade-type 30 A
• Circuitry fuse ...............................FGMB 5 A
DC POWER CABLE FUSE REPLACEMENT
Fuse
30 A
CIRCUITRY FUSE REPLACEMENT
The 13.8V DC from the power cable is applied to all circuits in the DX-SR8 through the circuitry
fuse. This fuse is installed in the PA unit.
Remove the top cover as shown on P.84.
1.
Replace the circuitry fuse as shown.
2.
Close the top cover.
3.
Fuse 5A