Alinco DR-SR8 - Manual (Page 42)

40
Chapter 2 Communications
Press the [ ź] key until 0 appears on 1MHz
8.
digit indication.
9.
Press the [MODE] key to select the AM
mode.
NOTE: You may operate [M/KHz] key to
select MHz digit as you like fi rst,
but depending on the frequency
combination in relation to the band-
plan programming, zero on the MHz
order may not be shown. In such case
as above, you may tune the 100 kHz
order fi rst then tune to the 1 MHz
order to avoid this.
REFERENCE: It is much easier to use the numeric keys to enter the frequency
direct. See Page 30 for details.