Interfaces environmental, Interfaces, Environmental – Epson 3 User Manual
Page 76: Page 64
Custom
4.13” (105mm) x 1.00” (25.4mm) minimum
8.6” (218.5mm) x 27 feet (8.23 m) (at 200
dpi)
max.
8.6” (218.5mm) x 18 feet (5.49 m) (at 300
dpi)
max.
(14” (355.6 mm) maximum length
recommended)
Paper Type
Thermal—Cut Sheet, Roll Paper,
Perforated Roll, or Fanfold Paper
Paper Loading
Manual—Single Sheet or Roll
Form Feed Modes
No Feed Mode
Fixed Page Mode
End of Page Mode
Interfaces
USB
Printer: USB “Mini-B”
(Using USB 1.1 “High Speed”)
Host: USB “A”
IrDA
Tiny TP extension to IrLMP, IrCOMM
(COM port emulation using 3 wire “cooked”
serial mode [IrLPT]), and IrOBEX, vCard,
vCal and vMSG (text portions only).
Bluetooth
2402~2480MHz ISM band, 79 x 1MHz,
SPP Protocol, Pairing/PIN supported.
Factory default = PIN disabled.
Environmental
Temperature
Operating: 14º to 113º F (-10º to 45º C)
Note: Operation at low temperatures may
slow the printer or cause it not to print at all.
Storage: 5º to 122º F (-15º to +50º C)
Humidity
Operating: 30-80% RH, non-condensing
Storage: 30-85% RH, non-condensing
Page 64