Airlink WLC3010 - Manual (Page 60)

Chapter 7 Troubleshooting
53
•
Make sure the SSID for the Wireless LAN Card is the same as the Access Point.
•
Make sure the security settings are the same as that of Access Point.
•
Make sure your Wireless LAN Card operation mode is set to Infrastructure.
•
Make sure you are not trying to connect to an 802.11a Access Point. 802.11a and
802.11b/g standards are not interoperable.
•
The Access Point has reached its maximum number of supported clients.
•
If MAC address access control is enabled on the Access Point, make sure the MAC
address of your Wireless LAN Card is not among the deny access list.