Airlink WLC3010 User Manual
Page 59

54Mbps Wireless LAN Card User's Manual
52
•
If in Ad-Hoc mode, make sure the Log on to Windows NT domain check box is
not selected in the Client for Microsoft Networks Properties dialog box in the
Network Configuration tab.
•
Incorrect IP Address or Subnet Mask. Check these settings in the TCP/IP
Properties dialog box in the Network Configuration tab.
•
Make sure you are not trying to connect to an 802.11a wireless adapter. 802.11a
and 802.11b/g standards are not interoperable.
Poor Link Quality
If the Link Quality display stays in the poor range, it could be due to one of the following
reasons:
•
Radio/object interference. To minimize this problem, move the devices within the
line of sight.
•
Distance between Wireless LAN Card and the target Access Point or wireless client
is too far. Decrease the distance between the Wireless LAN Card and Access Point
or wireless client.
Cannot Connect to Access Point
If you cannot make a connection to the Access Point, it could be due to one of the following
reasons:
•
Make sure the Access Point have no physical connection problems.