Connection – ACTi Streaming Explorer V.2.1.09 User Manual
Page 3
www.acti.com
Streaming Explorer User’s Manual
3
Connection
This section describes how to connect to your device. Before you successfully connect to the
device, only the
„Connect‟ page will be shown.
Connection setting
The first step is filling up all the fields and connecting to camera/video server.
Fig. 2 Connection Setting
1.
Media Type: Please select the corresponding media type according to the device.
i.
HTTP with control
ii.
HTTP without control
iii.
RTSP with control
iv.
RTSP without control
v.
TCP with control
vi.
TCP without control (default)
2.
Camera IP: Enter the IP address of camera/video server. Default value:
192.168.0.100. Please note that domain names are not supported in this field.