ACTi Streaming Explorer V.2.1.09 - Manual (Page 11)

www.acti.com
Streaming Explorer User’s Manual
11
DI/DO
DI/DO stands for digital input/digital output. External devices can be connected to camera / video
server, and notify cameras about an activity in camera site (DI). Or they can be activated by
camera upon either an event inside the camera or by the command from the control center (DO),
such as panic button (DI) and alarm horn (DO).
This chapter describes how to configure DI/DO
Fig. 11 DI / DO
DI Status
1. DI Default Setting: Select DI setting according to hardware setting of DI. Default value: 0x03
(device remains off, Device will receive DI input.). If the value is set as 0x00, device is by
default DI triggered on.
2. DI Status: If DI is trigger, it will show ; Otherwise, it will show
DO Trigger
3. DO1 On/Off: Click button to set DO1 On/Off
4. DO2 On/Off: Click button to set DO2 On/Off
Motion Setting
Motion Detection is a useful function. User can set an area to detect motion within the area.