ACTi Streaming Explorer V.2.1.09 - Manual (Page 12)

www.acti.com
Streaming Explorer User’s Manual
12
This chapter will teach user how to configure.
Fig. 12 Motion Setting – Getting motion settings
1. Get Motion Setting: Click this button to read current motion detection setting from device.
After clicking this button, the Motion Setup button will appear. User may now see previously
configured motion detection regions if there is motion activity.
2. Motion Setup: Click this button to start setting up motion and PIR detection. After Clicking
Motion Setup button, it will be replaced by an Apply button. It is used to save modified settings
to device. Now, user can start to configure motion and PIR settings.